Brand was acquired · Manufacturers

Fleetwood Homes

Fleetwood Homes was acquired by Cavco, and the name is still used. How to read a Fleetwood data plate when the original company is gone.

· About 3 min read

Status
Brand was acquired
Founded
1950
Headquarters
Riverside, California (historic)
Names on a data plate
Fleetwood, Fleetwood Homes

The Los Angeles Times, in its obituary for founder John C. Crean, dates the business to 1950, when he started the company that became Fleetwood. It grew into a major builder of manufactured homes and recreational vehicles, with a long stretch based in Riverside, California. Fleetwood is the example this library uses for an acquired brand. The name is still on thousands of data plates, and it is still used on new homes, but the company that originally built the older houses is not the company answering the phone in the same way. Ordering parts starts with that distinction.

What happened to the company

Cavco’s history page lists Fleetwood Homes among the companies it acquired, with 2009 in the table. Contemporary reporting described a more detailed sequence: Cavco bought a stake when Fleetwood Enterprises’ housing business was sold in bankruptcy, and in 2013 Cavco bought the remaining stake. That 2013 account is from a trade write-up of Cavco’s announcement, not from the statute book. The useful fact is the one both accounts support. Fleetwood Homes became a Cavco brand. It was not simply erased.

Fleetwood also put its name on recreational vehicles. That business changed hands on a separate path. A manual for a Fleetwood RV will not match a Fleetwood house. If you are standing in a house, you want the housing brand, the data plate, and the appliance labels.

This page calls the status “acquired,” not “defunct.” Defunct, on this site, means nobody is building under that name anymore. Fleetwood is still a name you can find on a current Cavco-family website, fleetwoodhomes.com. An older plate can still say Fleetwood when the plant that built it has been closed for years. The date on the plate is how you tell those apart.

Reading the plate

24 CFR 3280.5 requires the data plate to name the plant, the serial number, the model, the date, and the major factory-installed appliances. “Fleetwood” on that plant line is the identification. A dealer badge on the end of the house is not. Plates are often near the electrical panel, or in a closet or cabinet if the panel area was refinished.

Copy the appliance lines separately. A Fleetwood home from the 1990s did not leave the factory with one universal furnace. Coleman, Intertherm, Miller, and others supplied heat. The filter guide is about those brands. The Fleetwood line on the plate gets you a serial number. The furnace line gets you a filter.

Wind and roof zones are on the plate as well. They describe the loads the home was designed for. They do not tell you whether the skirting you add this year is legal. Skirting follows the installation standard and whatever the park requires now.

Parts, documents, and dead ends

For a home built after the Cavco acquisition, a Fleetwood retailer may be able to pull factory information from the serial number. Call with the serial, the plant, and the date. Do not expect a retail lot to stock a 1994 door from memory.

For an older home, shop the way you would for any other make. Measure the exterior door opening. Match a water heater to the listing and the closet. A seller who says “we don’t do Fleetwood anymore” may still be able to sell you a 34 by 76 outswing door if that is the hole in the wall. The refusal you should listen to is “we cannot match that appliance model,” not “Fleetwood is gone.”

If your plate names a brand this library has not written up yet, the same plate method applies. Manufacturers get bought, renamed, and closed. The serial number and the appliance models survive those press releases.

Questions people ask

Is Fleetwood Homes out of business?

The original Fleetwood Enterprises manufactured-housing business was bought out of that company’s collapse. Cavco’s history page lists a 2009 acquisition of Fleetwood Homes, and the Fleetwood name is still used on homes. The data plate on an older house still says Fleetwood even though the corporate owner changed.

Can I still get parts for a Fleetwood house?

You can get the same kinds of parts any manufactured home uses, matched to the opening or the appliance. A current Fleetwood retail lot may help with a newer home’s documents. An older home is identified from the data plate serial number and from the labels on the furnace, water heater, and doors. The Fleetwood name alone is not a part number.

Sources

  1. Cavco company history, listing a 2009 Fleetwood Homes acquisition — Cavco
  2. Reporting on Cavco completing ownership of Fleetwood Homes in 2013 — ManufacturedHomes.com
  3. 24 CFR 3280.5, data plate — eCFR
  4. John C. Crean obituary, founding year — Los Angeles Times